1967 Cadillac DeVille Dash Restoration: Why Bondo Fails

Categories

Is your model not here yet?

This is just a sampling. Contact us for Your Free Quote.

This 1967 Cadillac DeVille dash restoration starts with a problem we see a lot. Before the dash got to us, large cracks had been carved out and filled in with thick layers of Bondo. It’s an understandable move, but it doesn’t fix the real issue, and it makes a proper restoration more work.

What We Found on This Dash

Large areas of this dash had been bored out and filled with body filler. Even with all that Bondo, there were still cracks on both sides of the patched areas. The surface looked solid in spots, but it wasn’t sound.

The Real Problem Is the Foam

The core issue with an old dash pad isn’t the cracks on top. It’s the foam underneath. After decades of heat and sun, that original foam turns into something like a sponge. It has no strength left.

Putting a hard surface on top of spongy foam doesn’t change what’s underneath. You end up with a hard shell sitting on a soft base, and the cracks keep coming back around the edges.

Why It Wouldn’t Survive Our Process

When we put the new vinyl skin on a dash, it’s pulled down over the part with a lot of pressure, many pounds of it across the whole dash. If we tried to do that over this Bondo and spongy foam, the dash pad would collapse. There’s simply nothing solid underneath to hold the shape.

That’s why we can’t just skin over a patched dash. The structure has to be rebuilt first.

Our Prep Work

Here’s how we handle a dash like this one:

  • We carve out all of the Bondo by hand.
  • We strip out all of the spongy original foam.
  • We check the base the dash is built on.
  • We lay down new high-density foam to give the dash a new structure.
  • We hand shape that foam back to the factory lines of the ’67 Cadillac.

Removing the filler is just the start of the stripping process. Once the old foam is gone and the new foam is in, the dash has the strength to take the new vinyl and hold its shape for years.

A Word of Advice Before You Send Your Dash

If your dash is cracked, please don’t fill it, and don’t strip it either. Send it as it is. Filler adds hours of removal work, and a dash that’s already been stripped loses the shapes we rely on. We usually can’t work on stripped dashes, so if yours is already apart, send photos first and we’ll let you know.

Leaving it alone is the best thing you can do for it. We’ve been restoring dashes like this since 1981, and a cracked original is a good starting point.

How to Get Started

  • Get a quote on our website.
  • Send photos for a photo inspection. The instructions come with your quote email.
  • Fill out a packing slip.
  • Box it up and ship your part to our shop in Van Nuys.

Whether it’s a ’67 DeVille or another classic Cadillac, we’d be glad to take a look.

Get a free quote, or send us photos of your dash and we’ll tell you what it needs.

Just Dashes