Dash Restoration Vinyl: What Material We Use and Why

Categories

Is your model not here yet?

This is just a sampling. Contact us for Your Free Quote.

The number one question we hear is: what material do you use? People watch our videos and wonder if it’s plastic, or seat vinyl, or something they could pick up themselves. Here’s the straight answer on the dash restoration vinyl we use, and why it matters.

Can I Send My Own Material?

In short, no. A lot of folks ask if they can provide their own vinyl, usually something that matches their seats. We don’t do that, because seat vinyl isn’t made for this job. A dash sits in direct sun behind the windshield for years, and it needs a material made to handle that.

What We Actually Use

We use a very specific dash vinyl. It’s the same kind of material that’s been supplied to the car makers for decades. It’s formulated specifically for dashes and interior parts, and it has a few things going for it:

  • It has UV inhibitors built in to help it stand up to the sun.
  • It’s a cross blend between ABS plastic and the soft vinyl you’d think of on a seat.
  • That blend gives it a semi-rigid feel, so it holds its shape over the foam.
  • It’s made to last a very long time on a dash.

Thin on Purpose

The vinyl is about five sheets of paper thick. That’s thin, and it’s on purpose. It doesn’t add much material to the part, so it follows the shape underneath closely instead of rounding it over.

That’s why the foam work matters so much. The vinyl contours to whatever shape comes out of our foam department. If the foam lines are soft, the finished dash will look soft. If they’re crisp, the finished dash will be crisp.

20 to 40 Hours in the Foam Department

We spend anywhere from 20 to 40 hours on a given part in the foam department. That time goes into sculpting and sanding the new foam so every line is as crisp as we can make it. When the new vinyl skin is heated and shaped over the foam, that thin layer picks up all of those details, and the lines come out sharp and clean.

This is the part most people don’t see. The vinyl gets the attention, but the hours of hand shaping underneath are what make it look like a factory part again.

Matching the Factory Grain

Dashes from different makers and different years came with different surface textures. We keep about 20 to 30 vinyl textures on hand. Five to ten of them are the most common grains, and they cover most of the parts we do. The rest are specialty grains for the cars that need them.

When your part comes in, we match it to the closest grain we have so it looks right next to the rest of your interior.

How to Get Started

  • Get a quote on our website.
  • Send photos for a photo inspection. The instructions come with your quote email.
  • Fill out a packing slip.
  • Box it up and ship your part to our shop in Van Nuys.

If you’re curious which grain your dash would get, send us a few photos and ask. We’re happy to talk it through.

Get a free quote, or send us photos of your dash and we’ll tell you what it needs.

Just Dashes