If you own a 1970-1974 Plymouth Barracuda, you’ve probably weighed a reproduction dash against an E-Body dash restoration. We recently had both on the bench at the same time, and the differences were dramatic. Here’s what we found.
How a Reproduction Ended Up at Our Shop
The reproduction in this video came to us by accident from a customer. Since we had it, we took a close look at it next to an original E-body dash we had restored. It made for a useful side by side.
What We Found on the Reproduction
The first thing you notice is the substructure. The reproduction uses a plastic substructure instead of the original metal one. From there, the problems added up:
- The vents were misaligned.
- The map light frame didn’t line up with the foam padding.
- When we mounted it to the metal frame of the car, the screw holes didn’t line up.
- Forcing it in would risk stripping the screws, and possibly other damage.
- There were clear signs of warping along the back edge.
We don’t know exactly how old this reproduction is. But the warping tells the story. Plastic isn’t a proper support structure for a dash pad, and over time it moves. That’s something to think about if you plan to keep the car for years.
What a Restored Original Looks Like
The restored dash next to it is the customer’s original. This one even has custom vents installed, and because we were working with the real part, we could test fit them throughout the process.
It keeps the original metal substructure, which was bead blasted and painted. The map light opening fits the way it’s supposed to, because we test fit it many times along the way. Everything mounts where the factory intended.
About That Top Surface
These E-body dashes cracked up and got sun-beaten over the years, like most dashes from that era. When we restore one, we bring the top surface back to a clean, factory-correct shape, the way it looked when the car was new.
How We Restore an E-Body Dash
With a restoration, we’re working with your original part. Here’s the basic process:
- We strip out all of the degraded foam and vinyl.
- We hand sculpt the dash back to factory specifications with new high-density foam.
- We cover it in new vinyl, shaped over the foam with heat.
- We test fit the vents, map light, and trim throughout.
Which One Is Right for You?
It depends on the car you’re building. A reproduction is a lower-cost option, and for some builds that’s fine. But if fit, longevity, and keeping the original metal structure matter to you, restoring the original dash is usually the better path. We think the side by side in this video makes that pretty clear.
How to Get Started
- Get a quote on our website.
- Send photos for a photo inspection. The instructions come with your quote email.
- Fill out a packing slip.
- Box it up and ship your part to our shop in Van Nuys.
If you have your original E-body dash, even a badly cracked one, hang on to it. Send us photos and we’ll tell you what it needs.
Get a free quote, or send us photos of your dash and we’ll tell you what it needs.