One of the most common questions we get is whether we use molds to make new parts. The short answer is no. We work on original dash parts, the ones that came out of your car, and we rebuild them by hand. Here’s why that matters for how the finished part fits and lasts.
Hand Shaping Gives Us Control
When we shape a part by hand, we have the most control over how it fits. The original part has its own tooling underneath it, the factory metal or plastic structure that bolts into the car. We build on top of that, so the mounting points, the edges, and the openings all stay where the factory put them.
Take the Fiat Dino in the video. There’s no way to duplicate that original tooling in a mold. The shapes are too specific, and the volume is too small for anyone to make a good reproduction. Restoring the original is the way to get it right.
How Many Reproductions Are Made
A lot of reproduction parts are made from urethane or an open cell foam that’s pushed into a mold, and then the parts come out one after another. That works for making lots of parts quickly. What it doesn’t include is test fitting. Nobody is checking each part against the car or the parts around it.
When you ship us your old parts, we test fit them throughout the process. If a vent, bezel, or trim piece needs to line up, we check it along the way, not just at the end.
What’s on the Bench Right Now
At the time we shot this video, the shop had a good mix of projects in progress:
- A Fiat Dino with all of its interior parts
- An Opel 1900
- A VW GTI
- Ford Thunderbird door panels
- Ford Mustang door panels
Mustang door panels are a good example. They’ve been reproduced for a really long time, but the reproductions don’t fit well. That’s why people still send us their originals.
The E-Body Example
Another good example is the E-body, the 1970-1974 Dodge Challenger and Plymouth Barracuda. Reproduction dashes are out there, but plenty of owners decide to send us their original dash because of fit problems with the reproductions. We go through the differences between a restored E-body dash and a reproduction in a separate video.
Why Original Parts Make Sense
Restoring the original part keeps your car true to how it left the factory. The part was designed for your car, it mounts the way it should, and it has the real factory shape under the new foam and vinyl. Our job is to rebuild the outside so it looks new again, while keeping everything underneath that makes it fit.
That’s the approach we’ve taken since 1981, and it works on dashes, consoles, door panels, and other interior parts from all kinds of cars, American and imported.
How to Get Started
- Get a quote on our website.
- Send photos for a photo inspection. The instructions come with your quote email.
- Fill out a packing slip.
- Box it up and ship your part to our shop in Van Nuys.
If you have an original part that’s cracked or worn out, hang on to it. It’s usually the best starting point for a restoration.
Get a free quote, or send us photos of your dash and we’ll tell you what it needs.