Every classic dash that comes through our door starts the same way: with a dash restoration teardown. Before any new foam or vinyl goes on, we take the old part apart in a very specific way. It is the least glamorous step in the whole job, and it is the one we never skip.
What Shows Up at Our Shop
Most dashes arrive just the way you see yours in the car right now. Cracked, beat up, sun-baked, and sometimes patched. That’s normal, and that’s what we’re here for. The condition of the top layer tells us a lot, but the real story is underneath.
Why the Teardown Matters
The goal of the teardown is simple. We need to know the metal is clean and the substructure is sound. Everything we build afterward sits on top of that base, so if the base is weak, the finished dash won’t hold up.
During this step we:
- Remove the deteriorated vinyl and foam that can’t be saved.
- Check the metal substructure for damage and rust.
- Clean up the base so the new foam has something solid to bond to.
- Decide which pieces of original material are worth keeping.
We Don’t Always Go to Bare Metal
A lot of people assume we strip every dash down to bare metal. We don’t. On many dashes, some of that original material is useful. It holds the factory contours, and we use it as a guide when we rebuild the shape. Throwing it away would mean losing information about how the dash is supposed to look.
That judgment call is part of what you’re paying for. It comes from doing this work since 1981, on everything from big American cruisers to small European sports cars.
Please Don’t Strip Your Dash Yourself
This is the one thing we ask every customer. Don’t remove any material from your dash before you send it. Leave the old vinyl and foam in place, even if it looks rough. We’ll take care of it.
A dash that has already been stripped loses the original shapes and details we rely on. We usually can’t work on stripped dashes, so if yours has already been taken apart, send us photos first and we’ll let you know where you stand.
Example: A 1959 Cadillac Dash
In the video you can see a 1959 Cadillac dash on the bench. This one did need to come down to bare metal. Once it was there, we powder coated the underside so it stays clean and rust free for the long haul.
From there it moved into foam shaping. That’s where we rebuild the dash with new foam and bring back all the original details, the lines, the curves, and the edges that make a ’59 Cadillac dash look right.
What Comes Next
After the teardown and foam shaping, the part gets its new vinyl skin, which is shaped over the foam, then trimmed, finished, and colored. But none of that turns out right without a proper start. A clean, sound base is what lets the rest of the restoration last.
How to Get Started
- Get a quote on our website.
- Send photos for a photo inspection. The instructions come with your quote email.
- Fill out a packing slip.
- Box it up and ship your part to our shop in Van Nuys.
If your dash is cracked and tired, that’s exactly the kind of part we want to see. Send it as it is, and let us handle the teardown.
Get a free quote, or send us photos of your dash and we’ll tell you what it needs.