People see the finished dash, but most of the work in a classic car dash restoration happens long before the new vinyl goes on. In this video we walk through our foam shaping department, where every dash gets rebuilt from the inside out.
Every Dash Gets Its Own Plan
We have somewhere between 50 and 100 different foam techniques, and we pick what each job needs. In the video we’re starting on a 1970 Barracuda. The customer wants something custom, so the production notes call for deleting the center speaker area.
Before any of that, our technician has to strip out all the old degraded foam. You probably know the stuff: spongy, crumbly foam that’s over 50 years old. A lot of people try to fill the cracks with Bondo. The problem is that the damage isn’t only at the cracks. Between one crack and the next, the foam under the vinyl is breaking down too.
On an E-body dash like this one, we can spend about 32 hours in the foam department alone. That doesn’t include the teardown.
Structural Foam
Once the dash is torn down, we pour a new layer of liquid high-density foam. It rises like a layer cake over about 10 minutes, and once it cures it’s about as dense as wood. Then we grind it down and shape it.
We call this the structural foam stage. The goal is a strong foundation we can sculpt back to the dash’s original shape. Often we pour, shape, remove more old material, and pour again, until the whole dash has sound structure. The front face of a dash is a common weak spot. We’ve talked to plenty of owners who pulled a dash out and had a thumb go right through a spot they thought was fine.
The Foam You Feel
The last layer is a thin white aesthetic foam. This is what you feel when you pull the dash out of the box. It’s a high-density closed-cell foam.
For decades, many factory dashes used open-cell foam. It expands and contracts with every hot summer and cold winter. Picture a car in an unheated Chicago garage, with the dash foam moving in and out every season. We switched to closed-cell foam back in the ’90s, and we have dashes that have been in use for about 35 years. It lasts much longer.
Hard Plastic Prep
This department also preps hard plastic parts. We remove the degraded top layer before the part gets a new skin. That way it still looks and feels like hard plastic, but it has a fresh textured surface we can dye to look new. Painting old, degraded plastic usually doesn’t hold up.
Missing Chunks and Reference Points
If chunks of foam and vinyl are missing, that’s usually something we can work with. We keep a library of parts and measurements for reference. But please don’t strip your dash down. We need what’s left as reference points, and we usually can’t work on a dash that’s already been stripped. Send us photos first and we’ll tell you where you stand.
Restoration vs. Reproduction
People ask how a restoration compares with a reproduction they might buy online. The biggest differences are fit, the structure underneath, and the materials. Many reproductions are made from rubberized urethane with no metal running through them, and that material can shrink over time. When we restore your dash, we use high-density foam bonded to your original metal structure, so there’s nowhere for it to go.
We work on everything from GTO and early ’70s Mopar dashes to a ’59 Cadillac and an MGB. If you have an unusual car and can’t find interior parts, reach out.
Get a free quote, or send us photos of your dash and we’ll tell you what it needs.