How to Install a SoftCap Dash Cover in 5 Steps

Categories

Is your model not here yet?

This is just a sampling. Contact us for Your Free Quote.

Jason here, second generation owner at Just Dashes. A lot of classic car owners are stuck in the middle. You don’t want to pull your dash out, but you also don’t want to throw a piece of plastic or a carpet over it. That’s why we created the SoftCap dash cover, and this guide walks you through installing one.

What you’re installing

The SoftCap is a mid-tier solution. It’s built with our high-density foam and covered in our dash vinyl, so it looks and feels like a padded dash. It installs over your existing dashboard, and most people can get it on in about a day, plus cure time.

Here’s what you’ll need on hand: cleaning supplies, something to lightly scuff with, automotive-grade silicone adhesive, and sandbags or other soft weights.

Step 1: Prep the dash

Start by thoroughly cleaning the dashboard surface. Remove any dirt, dust, Armor All, grease, or loose material.

Don’t rush this step. The cleaner the surface, the better the final bond and fit. Protectant products like Armor All leave a film behind, so make sure it’s all gone.

Step 2: Prep the SoftCap

Lightly scuff the underside of the SoftCap, especially in the bonding areas. This gives the silicone adhesive something to grip as it cures.

Step 3: Apply silicone

Apply automotive-grade silicone adhesive evenly across the bonding surfaces. Focus on the major contact points and avoid building up too much in any one spot. You want even contact, not thick globs that push the cover up.

Step 4: Position and weight it

Carefully set the SoftCap onto the dashboard. Take your time lining up the edges and the vent openings, because this is what makes the finished dash look right.

Once it’s where you want it, apply even pressure using sandbags or soft weights to hold everything in place while the adhesive cures.

Step 5: Let it cure

Let the adhesive fully cure before you drive the car or remove the weights. Follow the cure time on the adhesive you’re using. Patience here pays off in the long-term fit and finish.

That’s it

That’s the whole install. You end up with a clean, OEM-style dashboard upgrade without removing the dash or waiting on a full restoration.

A few things to keep in mind:

  • A SoftCap is not a full restoration or a replacement dash pad. It improves the look of the dash you already have.
  • If your dash has severe warping, structural damage, or missing sections, send us photos before you order.
  • If you want your original dash rebuilt for a top-tier car, a full restoration is still the way to go.

If you don’t see your car on our website, give us a call. We’re adding new SoftCap applications all the time.

See current SoftCap applications at justdashes.com/SoftCap, or ask us about your car.

Just Dashes